All Categories
Dimmable LED Driver

Home > Products > Dimmable LED Driver

DALI 0-10V Downlight LED Dimming Power Supply 30W 900MA 540mA


Place of OriginChina
Brand NameWHOOSH
CertificationCE
Model NumberKS30ADP-900MCP1H-A3
Minimum Order Quantity50PCS
PriceUS$1-10
Delivery Time2-7 Days
Payment TermsT/T
Supply Ability20000PCS per day
Product Details
Dimming ModeDALI/0-10V/1-10V/PUSH DIM/RX/PWMOutput Current900/840/790/730/ 700/650/600/540mA
Output TypeSingle ColorOutput Voltage9-42V
Output Frequency50/60HzInput Voltage180-264Vac
Output Power30WWarranty3 Years
Size154*49.5*30.5mmMaterialFlame Resistant Plastic
IP LevelIP43 For IndoorNo Load Voltage53V
ProtectionOver-load, Over-voltage, Over-current, Short-circuitTypeConstant Current
PFC0.9IsolatedIsolated
High LightLED Dimming Power Supply 30W, Downlight LED Dimming Power Supply, DALI Dimmable Constant Current Led Driver
Product Description
Product Specification
DALI 0-10V Downlight Dimmable LED Driver 30W for downlight, Constant Current Dimming 900/840/790/730/ 700/650/600/540mA
1) Product SUMMARY

KS30ADP-900MCP1H-A3 is a 30W AC/DC constant current mode output LED driver featuring the multiple levels selectable by DIP switch and complies with DALI standard protocol IEC 62386. 【KS30ADP-900MCP1H-A3】can be connected to DALI main controller or Touch DIM to a chieve a smooth dimming effect.

2) Applications

Application of Dimable LED Driver:  Downlight, Panel light, Spotlight, Ceililing Light, Decoration Light, Floor light, Flood light.

pic-1

3) Product Features

Single channel output, output current level selectable

Constant current type

Meet DALI Protocol IEC 62386

Support Touch-DIM function

High efficiency up to 82%

Built-in active PFC function, PF=0.9

Dimming effect smooth, no flicker

Protections: Short circuit, over load, Over voltage

4) Technical Specifications
ModelKS30ADP-900MCP1H-A3
OutputCurrent (mA)900/840/790/730/700/650/600/540mA
Current Tolenrance±5%
Ripper and Noise200mVp-p
Voltage9-42Vdc
Channel±0.3%
No load ouput voltage±0.5%
InputAC Voltage range180~264VAC
PC Factor0.9@230VAC,Full load
Efficiency≥86%
AC Current (max)0.17Amax@230VAC
Standby Power<0.5W
Inrush Current (Max)Cold start 50A/240V AC
Leakage Current<3.5mA/240VAC
ProtectionsOver-load110%-130% of rated power
Short circuitProtection mode: auto recovery after short circuit faults removed
Over loadProtection mode: auto recovery after short circuit faults removed
Over voltageProtection mode: shot off output voltage, restart to recovery
EnvironmentWork Temp.-25~40℃
Work Humidity20%-90% RH no condensation
Storage Temp.-25~80℃
Vibration resistancerevolution 280±10%, 45 mins,X.Y.Z three directions
Drop test600mm
SurgeCommon mode 4KV, different mode 2KV
Safety and EMCSafety standardDesign by standard:GB9254-1998,GB17625.1-2003,
DALI standardIEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-207: 2009, DALI 1.0
Withstand voltageI/P-O/P 2KVAC I/P-FG 2KVAC O/P-FG 500VAC
Insulation resistanceI/P-O/P .I/P-FG .O/P-FG: >100MΩ/500VDC/25℃/70%RH
EMC EissionDesign by standard: EN55022B, Class B
Harmonic currentDesign by standard:GB17625.1; EN61000-3-2, -3 limitation requirement.
EMC ImmunityDesign by standard: EN55024; EN61000-4-2,3,4,5,6,8,11
MTBF≥30000 hours 40°C
OthersWorking Temp-20°C~50°C
Storage Temp. Humidity-40°C~85°C, 20-90%Rh
tc90°C
Materialflame-resistant PC
IP RatingIP20
Lifetime30000Hrs@tc:80°C
Warranty3 Years Warranty
Swithcing Cycle>15000 times
Packing50PCS/Carton; 8.25kg/Carton; Carton Size: 319*254*136mm(L*W*H)
Dimension154*49*30.5mm
5) Dimming Function

1. Press the Push DIM (Touch DIM) switch for 8s or more,the driver can be controlled via Push DIM switch.

2. Short press the Push DIM (Touch DIM) switch (<0.5s) to control the lamp on or off.

3. Long press the Push DIM (Touch DIM) switch (>0.5s) to dim the brightness of light. The dimming direction will change every time after pressing switch.

4. Double-click the Push DIM (Touch DIM) switch (<0.3s), then all lamps connected on the device will be set maximum brightness.

5. The brightness adjustment range is 1%-100%, and the light can be turned off through short pressing when doing the adjustment with long pressing Push DIM (Touch DIM) switch.

6. With the Power off memory function, the power-down state will be recovered when power on again.

6)  Cautions

1. This product should be installed by qualified personnel.

2. This product is non waterproof, need to avoid sun and rain.In case of outdoor use, please ensure it is mounted in a water proof enclosure.

3. Good heat dissipation conditions extend product life. Please install the product in a well-ventilated environment.

4. Please make sure LED power supply output voltage, current is used to meet the product requirements.

5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector.

6. Due to safety concerns, PVC or rubber cord of 0.75- 1.5mm² is recommended for input and output terminal(s)(excluding signal terminals). Flat power cord is not suitable.Ensure all wire
connections and polarities are correct before applying power to avoid any damages to the LED lights.

7. In case of malfunction, do not repair it yourself.

7) Other similiar models
ModelTypeisolated/not isolatedDimming ModePowerInput VoltagePFNo load voltageOutput VoltageOutput CurrentOutput typeProduct SizeL*W*H
KS15ADP-420MCP2H-A2Constant CurrentisolatedDALI15W180-264V0.956V9-42V420/390/360/330/300/270/240/210mADual145*45*29.5mm
KS15ADP-420MCP1H-A2Constant CurrentisolatedDALI15W180-264V0.956V9-42V420/390/370/330/310/290/260/230mASingle145*45*29.5mm
KS30ADP-900MCP1H-A3Constant CurrentisolatedDALI30W180-264V0.953V9-42V900/840/790/730/700/650/600/540mASingle154*49.5*30.5mm
KS50ADP-1400MCP1H-A4Constant CurrentisolatedDALI50W180-240V0.953V9-42V1400/1350/1280/1230/1200/1140/1090/1040mASingle166*52.2*30.5mm

pic-2

pic-3

pic-4

Factory Capacibility
1. Professional manufacturer

17 Years experience,  10,000 square meters factory, 400+ employees,  8 production lines

2. Scientific Management

ISO9001:2015 Quality Management System Certified, 7S administration

3. Independent R&D teams

10+ Engineer teams, innovative and independent R&D ability

4. Advanced equipment

SMT plant,  wave-soldering machine,  Semi-auto assembling, EMC lab, Test Lab, Ageing room etc.

pic-4


Customer Questions & Answers
    Did not match any questions!
You can tick the products you need and communicate with us in the message board.

MODELDimming ModeTypePowerInput VoltageOutput VoltageOutput CurrentOutput TypeSize
KS15ADP-420MCP2H-A2DALIConstant Current15WAC 180-264VDC 9-42V420/390/360/330/ 300/270/240/210mAWarm/cool145*45*29.5mm
KS15ADP-420MCP1H-A2DALIConstant Current15WAC 180-264VDC 9-42V420/390/370/330/ 310/290/260/230mASingle145*45*29.5mm
KS30ADP-900MCP1H-A3DALIConstant Current30WAC 180-264VDC 9-42V900/840/790/730/ 700/650/600/540mASingle154*49.5*30.5mm
KS50ADP-1400MCP1H-A4DALIConstant Current50WAC 180-264VDC 9-42V1400/1350/1280/1230/ 1200/1140/1090/1040mASingle166*52.2*30.5mm
INQUIRY
MODELSIZE/MMAC INPUTDC OUTPUT VOLT. OUTPUT CURRENTRATED POWERCOOLINGPCS/CTNWARRANTY

Hot categories