All Categories
HX-CBL Shiny Housing Series

Home > Products > Slim Power Supply > HX-CBL Shiny Housing Series

ac 180-264v dc 12V 60W Power Supply For LED Strip


Place of OriginChina
Brand NameHUA XIN
CertificationCE
Model NumberHX-60CBL-12
Minimum Order Quantity120PCS/CTN
PriceGet the latest prices
Packaging Details120PCS/CTN, G.W: 20.0KG/CTN
Delivery Time2-7 Days, Regular stock
Payment TermsT/T
Supply Ability20000PCS/DAY, 400+Employees, 8 production lines
Product Details
Output Current5 AmpereOutput TypeSingle
Output Voltage12VdcOutput Frequency50/60Hz
Input Voltage180-264VacOutput Power60W
Warranty3 YearsSize155*54.5*23MM
ProtectionOver-load, Over-voltage, Over-current, Short-circuit
High Light264VAC 12V 5A Power Supply, 12V 5A 60W LED Driver, 264VAC Power Supply For LED Strip
Product Description
Sepcifications
ModelSize/mmInputOutputOutput CurrentWarranty
HX-60CBL-12155X54.5X23AC 180~264VDC 12V5A3 Years
HX-60CBL-24155X54.5X23AC 180~264VDC 24V2.5A3 Years
Input Characteristics
Input Voltage: AC 180-264V
Input Frequency: 50/60Hz
Input Current: 1.0A Max (full loaded at the lower limited of input voltage range)
Inrush Current: 80 Amps Max. Cold start at 240Vac input, with rated load and 25℃ ambient.
Ac Leakage Current: 3.5mA Max. At 240Vac input
Output Characteristics
1. Output Power

Voltage

Min. Load

Rated Load

Peak@10mS

Rated Output Power

DC 12V

0A

5A

72W

60W

DC24V

0A

2.5A

72W

60W

2. Line Regulation

Voltage

Min. Load

Rated Load

Line Regulation

Load Regulation

DC 12V

0A

5A

±3%

±5%

DC24V

0A

2.5A

±3%

±5%

3. Ripple and Noise

Under nominal voltage and nominal load,the ripple and noise are as follows when measure with Max.Bandwidth of 20MHz and Parallel 47uF/0.1uF,crossed connected at testing point.

Voltage

Ripple and Noise(Max.)

12V DC

400mV p-p

24V DC

400mV p-p

4. Turn on delay time: 2Second Max.at 220Vac input and output Max.load.

5. Rise time:400 mS Max.at 220Vac input and output Max load.
6. Efficiency: 86% Min, At220Vac input voltage and full load calculation efficiency.
7. Overshoot: 10% Max.When power supply at turn or turn off.
Protection Functions:
1. Short circuit protection: auto recovered when short circuit faults remove.
2. Over current Protection: auto recovered when over current faults remove.
3. Over load protection: auto recovered when over current faults remove.
4. Over voltage protection: locked down, restart to recover
Test:

Drop test, Salt Spray Test, Surge test, Ageing test, lightning test, Temperature Variation test etc.

Safety Requirement
1. Safety Standard: Safety: Design by IEC60950 standard.
2. DIELECTRIC STRENGTH Hi-Pot:
Primary to secondary:1200Vac/10mA/60S for type test.
Primary to case:1200Vac/10mA/60S for type test.
3. Iusulation resistance:Primary to secondary:10MΩ min at 500V DC.
EMI Requirement

Designed according to the following standards:

1. FCC class B rules
2. EN55022 class B rules
3. GB9254-1998,GB17625.1-2003
Customer Questions & Answers
    Did not match any questions!
You can tick the products you need and communicate with us in the message board.

MODELSIZE/MMAC INPUTDC OUTPUT VOLT.OUTPUT CURRENTRATED POWERCOOLINGPCS/CTNWARRANTY
HX-60CBL-12155×54.5×23180-264VACDC 12V5A60WNO FAN1203 YEARS
HX-60CBL-24155×54.5×23180-264VACDC 24V2.5A60WNO FAN1203 YEARS
HX-120CBL-12234×54.5×23180-264VACDC 12V10A120WNO FAN603 YEARS
HX-120CBL-24234×54.5×23180-264VACDC 24V5A120WNO FAN603 YEARS
HX-150CBL-12234×54.5×23180-264VACDC 12V12.5A150WNO FAN603 YEARS
INQUIRY
MODELSIZE/MMAC INPUTDC OUTPUT VOLT. OUTPUT CURRENTRATED POWERCOOLINGPCS/CTNWARRANTY

Hot categories