All Categories
ENEN
10W Dimmable power supply CC DC 9-42V 420/390/360/330/290/260/230/200mA PC plastic shell

Home > Products > 10W Dimmable power supply CC DC 9-42V 420/390/360/330/290/260/230/200mA PC plastic shell

10W Dimmable power supply CC DC 9-42V 420/390/360/330/290/260/230/200mA PC plastic shell
10W Dimmable power supply CC DC 9-42V 420/390/360/330/290/260/230/200mA PC plastic shell
10W Dimmable power supply CC DC 9-42V 420/390/360/330/290/260/230/200mA PC plastic shell
10W Dimmable power supply CC DC 9-42V 420/390/360/330/290/260/230/200mA PC plastic shell

10W Dimmable power supply CC DC 9-42V 420/390/360/330/290/260/230/200mA PC plastic shell


Product Description
Product Specification

Triac Constant Current Dimming 10W140-350mA LED Driver for downlight, dimmable led power supply

1) Product SUMMARY

HX10T-350MC1H-A2 is a constant current output mode LED driver. The output current can be easily set via DIP switch.The driver supports leading edge (Triac) and trailing edge (ELV) dimmer, and can be compatible with the systems of various brands to achieve a smooth dimming effect.

2) Applications

Application of Dimable LED Driver:  Downlight, Panel light, Spotlight, Ceililing Light, Decoration Light, Floor light, Flood light.

image

 

1) Product Features

1. Single channel output, output current level selectable by DIP S.W.

2. Support Leading edge (Triac) and Trailing edge (ELV) dimmer

4. Class 2 power supply. Full protective plastic housing

5. Dimmable range: 1%-100%

6. 8 levels of current selectable

7. Logarithimic output curve, smoother dimming, no flicker

8.  Protections: Short circuit, over load, over temperature

 

2) Technical Specifications

Model

HX10T-420MC1H-A2

Output

Current (mA)

350/320/290/260/230/200/200/170/140mA

Current Tolenrance

±5%

Ripper and Noise

200mVp-p

Voltage

9-28Vdc

Channel

±0.3%

No load ouput voltage

±0.5%

Input

AC Voltage range

180264VAC

PC Factor

0.9@230VAC,Full load

Efficiency

≥86%

AC Current (max)

0.17Amax@230VAC

Standby Power

<0.5W

Inrush Current (Max)

Cold start 50A/240V AC

Leakage Current

<3.5mA/240VAC

Protections

Over-load

110%-130% of rated power

Short circuit

Protection mode: auto recovery after short circuit faults removed

Over load

Protection mode: auto recovery after short circuit faults removed

Over voltage

Protection mode: shot off output voltage, restart to recovery

Environment

Work Temp.

-25~40℃

Work Humidity

20%-90% RH no condensation

Storage Temp.

-25~80℃

Vibration resistance

revolution 280±10%, 45 mins,X.Y.Z three directions

Drop test

600mm

Surge

Common mode 4KV, different mode 2KV

Safety and EMC

Safety standard

Design by standard:GB9254-1998,GB17625.1-2003,

DALI standard

IEC 62386-101: 2014, IEC 62386-102: 2014; IEC 62386-207: 2009, DALI 1.0

Withstand voltage

I/P-O/P 2KVAC I/P-FG 2KVAC O/P-FG 500VAC

Insulation resistance

I/P-O/P .I/P-FG .O/P-FG:100MΩ/500VDC/25℃/70%RH

EMC Eission

Design by standard: EN55022B, Class B

Harmonic current

Design by standard:GB17625.1; EN61000-3-2, -3 limitation requirement.

EMC Immunity

Design by standard: EN55024; EN61000-4-2,3,4,5,6,8,11

MTBF

≥30000 hours 40°C

Others

Working Temp

-20°C~50°C

Storage Temp. Humidity

-40°C~85°C, 20-90%Rh

tc

90°C

Material

flame-resistant PC

IP Rating

IP20

Lifetime

30000Hrs@tc:80°C

Warranty

3 Years Warranty

Swithcing Cycle

>15000 times

Packing

50PCS/Carton; 8.25kg/Carton; Carton Size: 319*254*136mm(L*W*H)

Dimension

119*30.5*23.5mmmm

3) Dimming Curve
image

 

6) Cautions

1. The product shall be installed and serviced by a qualified person.

2. This product is non-waterproof. Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof enclosure.

3. Good heat disspation will prolong the workign life of the controller. Please ensure good ventilation.

4. Please check if the output voltage and current of any LED power supplies used comply with the requirement of the product.

5. Please ensure that adequate sized cable is used from the controller to the LED lights to carry the current. Please also ensure that the cable is secured tightly in the connector.

6. For safety consideration, PVC or rubber cord of 0.75-1.5mm² is recommended for input and output terminal(s). Flat power cord is not suitable. Ensure all wire connections and polarities are correct before applying power to avoid any damages to the LED lights.

7. If a fault occurs, please returen the product to your supplier. Do not attempt to fix this product by yourself.

7) Other similiar models

 

Model

Type

isolated/not isolated

Dimming Mode

Power

Input Voltage

PF

No load voltage

Output Voltage

Output Current

Output type

Product SizeL*W*H

HX10T-320MC1H-A1

Constant Current

isolated

DALI

10W

180-264V

0.6

47V

9-28V

350/320/290/260/230/200/170/140mA

Single

119*30.5*23.5mm

HX15T-420MC1H-A2

Constant Current

isolated

DALI

15W

180-264V

0.6

47V

9-42V

420/390/360/330/290/260/230/200mA

Single

145*45*29.5mm

HX30T-900MC1H-A2(with PFC function)

Constant Current

isolated

DALI

30W

180-264V

0.6

47V

9-42V

900/840/790/730/700/650/600/540mA

Single

145*45*29.5mm

 

image

image

 

Factory Capacibility
1. Professional manufacturer

20 Years experience,  10,000 square meters factory, 400+ employees,  8 production lines

2. Scientific Management

ISO9001:2015 Quality Management System Certified, 7S administration

3. Independent R&D teams

10+ Engineer teams, innovative and independent R&D ability

1) 4. Advanced equipment

SMT plant,  wave-soldering machine,  Semi-auto assembling, EMC lab, Test Lab, Ageing room etc.

corporate style

Dingtalk_20240125084659

8002

Customer Questions & Answers
    Did not match any questions!
You can tick the products you need and communicate with us in the message board.
INQUIRY
MODELSIZE/MMAC INPUTDC OUTPUT VOLT. OUTPUT CURRENTRATED POWERCOOLINGPCS/CTNWARRANTY

Related product categories